Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in McMurray, PA
Chimney Inspection in McMurray comes down to a few plain questions: is your flue safe to burn, is anything cracked or blocked, and what actually needs fixing. McMurray (15367) is a Peters Township suburb where most homes went up in the 1990s and 2000s with prefabricated factory wood-burning fireplaces, tall sided exterior chases and manufactured stainless-steel liners. That changes the work. We inspect those systems, sweep what’s burned, and chase the chase-cover and cap leaks that show up after a southwestern Pennsylvania freeze-thaw winter. Our technicians have up to 14 years of experience. Call (844) 761-5636. We answer 24/7.
Why McMurray Homes Are Different
The dominant chimney in McMurray isn’t a brick-and-mortar masonry stack. It’s a prefabricated metal fireplace with a factory stainless-steel flue liner, tucked inside a tall sided chase on the outside of a two-story house. Older Pittsburgh neighborhoods closer to the city still carry masonry chimneys that need joint repointing and clay tile work. Your McMurray chimney is a different system with different failure points: chase covers, cap seams, flashing, and the liner sections themselves.
Then there’s the climate. Southwestern Pennsylvania runs a long heating season, and fireplaces here see heavy use from November through March. Freeze-thaw cycling through those months works on exterior chases, caps and mortar crowns, which is why spring inspections after a hard winter are a recurring need in McMurray. Add wooded lots and you get leaves and seed debris clogging caps and spark arrestors, sometimes by mid-fall. Most of what we find here starts outside the flue, not inside it, and that shapes how we inspect and what we recommend.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main McMurray Services
Two jobs bring most McMurray homeowners to us: a sweep to clear out a season of creosote, and a repair when the inspection turns something up.
Chimney Sweep in McMurray
Sweeping a prefab fireplace means clearing soot and creosote from a stainless-steel liner, not brushing brick. It’s a different motion and different tooling, and it’s easy to damage a manufactured liner if the sweep treats it like masonry. We work the flue, check the firebox and damper, and look at the cap and spark arrestor, which on wooded McMurray lots frequently hold leaves and seed debris. A sweep here also gives us a look at the chase top. If you’re due, book a chimney sweep and we’ll handle the rest.
Chimney Repair in McMurray
Repair on these homes usually centers on exterior components taking wind and ice: chase covers, caps, flashing and crowns. When the problem is inside the liner, the fix ranges from ceramic resurfacing with HeatShield to full relining with DuraFlex, depending on what the camera shows. We also fit Famco and Copperfield caps and flashing, the parts that protect the system between visits. If you already know something’s wrong up top, start with chimney repair.
Chimney Inspection in McMurray
Chimney inspection in McMurray is largely a matter of reading manufactured flue liners and exterior chases rather than masonry stacks. These homes were built through the 1990s and 2000s, so their factory fireplaces are now old enough that liner sections, chase covers and caps have had years of freeze-thaw winters working on them. An inspection tells you where the system actually stands. Scope and reporting follow the CSIA-recognized standards for a Chimney Inspection, so you get a documented result rather than a verbal guess.
Fireplace Inspection
Signs you need it
You’re seeing smoke spill into the room, a damper that won’t seal, rust or white staining inside the firebox, or a firebox wall that’s visibly warped or cracked.
What it costs in McMurray
A standard inspection typically runs $125 to $275 in McMurray, while a Level 2 inspection with camera work typically runs $250 to $450.
How we do it
We inspect the firebox, damper, smoke chamber and firebrick by hand and light, then confirm the liner condition from the top and, on a Level 2, with a camera run through the flue.
Chimney Flue Inspection
Signs you need it
Creosote is building faster than you expected, the draft has gone weak, or you’ve had a chimney fire and need the flue checked for damage before burning again.
What it costs in McMurray
Expect roughly $125 to $275 for a standard flue inspection, and $250 to $450 when a Level 2 camera inspection is needed to see the whole liner.
How we do it
We sweep the flue first, then run a camera down the full length of the stainless liner, checking every joint, and photograph what we find so you can see it yourself.
What Chimney Inspection Costs in McMurray
| Item | Typical range in McMurray |
|---|---|
| Standard chimney inspection | $125 – $275 |
| Level 2 inspection with camera | $250 – $450 |
| Inspection bundled with a sweep | $125 – $275 plus sweep |
Do I really need a Level 2 inspection in McMurray?
Usually only when something has changed: a new fireplace install, a chimney fire, a home sale, or a liner you’re unsure about. A Level 1 visual inspection covers routine annual checks. If we see reason to go further, we’ll show you the camera footage and explain why.
Will a camera inspection tell me if my liner needs replacing?
Yes. A camera run through the full flue shows joint separation, cracks and corrosion on a stainless liner. Nothing is recommended without footage you can look at. If HeatShield resurfacing can solve it instead of full replacement, we’ll say so. Call (844) 761-5636 for a free estimate.
Brands We Service in McMurray
We work with professional-grade trade brands specified by certified chimney contractors: DuraFlex flexible liner systems, HeatShield ceramic resurfacing, and Famco and Copperfield caps and flashing. Nothing is sourced from big-box retailers. Turnaround depends on what the inspection finds; we confirm parts and timing before booking. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in McMurray, PA
| Service | Typical range in McMurray |
|---|---|
| Standard chimney inspection | $125 – $275 |
| Level 2 inspection with camera | $250 – $450 |
| Inspection with sweep | $125 – $275 plus sweep |
| Chimney sweep | $125 – $275 |
| Sweep and inspection combined | $250 – $450 |
| Chase cover or cap repair | $150 – $450 |
| Flashing repair | $150 – $350 |
| Crown repair or resurfacing | $250 – $600 |
| HeatShield liner resurfacing | $800 – $1,800 |
| DuraFlex liner replacement | $1,500 – $3,500 |
What pushes price up in McMurray is height and access: these two-story exterior chases take more setup than a low masonry stack, and a badly damaged liner moves you from resurfacing into replacement. The written estimate sets the final price, and we give it before any work is booked.
Neighborhoods We Serve in McMurray
We cover McMurray and the surrounding Peters Township area, from the wooded lots along the southern edge of the township up toward the Route 19 corridor. Homes here are mostly large two-story suburban builds on mature wooded lots, which is exactly the kind of property where cap and spark arrestor debris builds up fast. Response times are consistent across the area. Call (844) 761-5636. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
- McMurray proper (15367)
- Peters Township neighborhoods along Route 19
- Waterdam and the surrounding wooded subdivisions
- Venetia-adjacent areas on the southern edge
Service Area – Cities Near McMurray
McMurray sits south of Pittsburgh, and our service area reaches the towns around it. We work in Gastonville, PA, just up the road, and over in Glassport, PA along the Monongahela. North toward the city we cover Green Tree, PA and Mount Oliver, PA. Housing stock shifts as you move closer to Pittsburgh, so masonry work picks up in those towns where McMurray’s prefab fireplaces taper off.
Serving McMurray, PA – Our Local Coverage Area
We serve McMurray and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in McMurray
Homeowners in McMurray ask the same handful of practical questions before they book, so here’s how it works.
Bookings are scheduled based on the season and our current workload. Fall fills first as people prepare for the heating season, so spring and early summer are easier to get. Call (844) 761-5636. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Peters Township generally requires a permit for structural chimney work like full relining or rebuilding a chase crown, though a routine sweep or inspection doesn’t need one. HOA rules vary by subdivision, so check your own before exterior changes. We’ll tell you what your job needs.
Yes. We cover all of McMurray (15367) and the rest of Peters Township, plus nearby towns like Gastonville and Glassport. If you’re not sure whether your address falls inside our service area, call and we’ll confirm before scheduling anything.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What McMurray Customers Say
"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
- Danika Mosley"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Nathan Gallagher"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Marco Ramirez