Masonry repair
Sweep & inspection
Caps & crowns
Flue relining
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across McMurray
If your chimney is leaking, smoking, or just overdue for a real look, call (844) 761-5636. We repair chimneys across McMurray and the surrounding Peters Township streets, and we handle the sweep, the inspection, and the repair ourselves so you’re not passing a diagnosis from one contractor to another. Chimney work in McMurray looks different from what you’d see on the older brick-and-mortar homes closer to Pittsburgh. Most of the houses out here were built in the 1990s and 2000s with prefabricated fireplaces and factory stainless-steel liners, and that changes what actually fails. We know the difference, and we’ll show you what we find before recommending a fix.

Why McMurray Homeowners Call Pittsburgh Chimney Cleaning for Chimney Repair
McMurray homeowners call us because the person who sweeps the flue is the same person who diagnoses and repairs it. No handoffs, no conflicting opinions about whether a liner really needs replacing. Our technicians have up to 14 years of experience, and we work with the same professional-grade materials specified by certified chimney contractors rather than consumer-grade parts pulled off a shelf.
We’re licensed and insured, and every job starts with an inspection so the recommendation is based on what we can actually see inside your flue, not a checklist. We work throughout McMurray, from the wooded lots off Route 19 out toward the neighborhoods closer to Peters Township schools. If you’ve deferred chimney maintenance for a few seasons, that’s fine. We’ll tell you plainly where things stand and what can safely wait. Nothing gets recommended without camera evidence you can look at yourself.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Repair Companies in McMurray
Chimney Repair Companies in McMurray face a different set of problems than the ones working the brick stacks closer to the city, because the housing stock here is prefab and the failures follow from that. On these 1990s-2000s two-story homes, most repair calls involve the flue liner, the chase cover, and the cap rather than the crown or the brickwork. A Level 2 inspection runs $200 to $450, and a routine sweep typically falls between $180 and $320, with the written estimate setting the final price. If you’re comparing companies, ask who actually does the repair after the sweep.
Prefab Flue Liner Repair
Factory stainless-steel liners are what these McMurray fireplaces were built around, and they rust from the top down when water gets in behind a failed cap. Repairing one means matching a compatible liner system, not squeezing in whatever fits. HeatShield ceramic resurfacing handles some deteriorating joints without a full replacement.
Chase Cover and Cap Replacement
On a tall sided exterior chase, the cover and cap take the brunt of freeze-thaw winters. A cracked or missing chase cover lets meltwater run down into the liner, and that’s the start of most of the liner damage we find. Famco and Olympia Chimney components give you a proper seal again.
Chimney Masonry Repair in McMurray
Chimney Masonry Repair in McMurray is a smaller share of our work than you’d find on older Pittsburgh homes, but plenty of these neighborhoods have architectural chimneys that were built with real brick, and those do need the masonry work. Repointing and tuckpointing run $450 to $900 for a typical stack, spalling brick replacement lands around $600 to $1,200, and waterproofing costs roughly $300 to $600. Freeze-thaw cycling through the long Southwestern Pennsylvania heating season is what drives most of it. The written estimate sets the final price.
Mortar Joints and Spalling Brick
When the mortar between bricks crumbles, water gets behind the face and pushes the brick face off, which is spalling. Repointing seals those joints again, and replacing the spalled brick stops it spreading. Catching it early keeps a repair from turning into a rebuild.
Flashing and Waterproofing
Chimney water damage in McMurray usually starts at the roof line, not the crown. Failing flashing lets water track down the chase, and a breathable waterproofing coat on masonry keeps the freeze-thaw cycle from working into the pores. Both are straightforward fixes when they’re caught before the framing is wet.

Trusted Brands We Service in McMurray
We work with a curated portfolio of professional-grade trade brands: DuraFlex flexible liner systems for relining, HeatShield ceramic resurfacing for restorable liners, and Olympia Chimney and Famco for caps, chase covers and flashing components. These are the materials specified by certified chimney contractors, not the consumer-grade parts sold at big-box retailers. We don’t claim to stock parts locally, so turnaround depends on the specific system your chimney needs, and we’ll tell you the realistic timeline when we write the estimate. For a house with multiple fireplaces and flues, that matters. Getting the right part the first time beats a second visit and a second diagnosis.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in McMurray Homes
- Cracked chase covers on tall exterior chases. Freeze-thaw cycles split the cover atop the sided chase, and meltwater runs down into the prefab liner from the top. That’s the usual source of water stains near the chase on a two-story McMurray home.
- Hairline cracks in builder-grade prefab fireboxes. The refractory panels in factory fireplaces crack over years of heavy use, and you won’t see it from the hearth. A Level 2 inspection is what catches it, and it’s why spring inspections after a hard winter keep coming up.
- Rusted stainless-steel flue liners. Once water gets behind a failed cap seal, the liner rusts from the top down. Left alone, a compromised liner ties directly to carbon monoxide risk, so it’s diagnosed before it becomes that.
- Clogged caps and spark arrestors. The wooded lots around McMurray drop leaves and seed debris that pack into caps, restricting draft and masking liner damage until smoke backs up into the room. Clearing them is a small job when it’s caught early.
Pricing for Chimney Repair in McMurray, PA
Chimney repair in McMurray is priced per job by a written estimate, and the estimate is free. A typical prefab flue reline runs $2,500 to $5,500 depending on liner length and the system your fireplace requires. Cap and chase cover replacement generally falls between $350 and $900. HeatShield ceramic resurfacing, when your liner can be restored rather than replaced, usually lands around $1,200 to $2,800 and is often the cost-effective alternative to a full reline. What moves the number is access to the chase, the condition of the existing liner, and whether the cap or cover is a straight replacement or a custom fit. We’ll tell you when a repair can safely wait, and how long.
We Also Serve Cities Near McMurray
We cover chimney repair in McMurray and the towns around it, including Gastonville, Glassport, Green Tree, and Mount Oliver. If your home sits just outside Peters Township, the housing stock and the failure modes are similar, and our inspection-first approach carries over. Call to confirm coverage for your address. Our chimney repair team handles sweep, inspection, and repair together.
Serving McMurray, PA – Our Local Coverage Area
We serve McMurray and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in McMurray
Yes. Prefab fireplaces in McMurray are built around factory stainless-steel flue liners, so repair work centers on the liner, chase cover, and cap rather than a crown or brick rebuild. The materials and the access are different, and a contractor who only works brick stacks may not be the right fit. Call (844) 761-5636 for an exact quote; estimates are free.
An annual inspection for each chimney is the standard, especially in a house with several fireplaces and flues, because each appliance fails differently. Gas inserts need their own venting check, and wood-burning fireplaces see heavy use from November through March here. A spring inspection after a hard winter catches freeze-thaw damage while it’s still a small fix. Call (844) 761-5636 to book one.
A cracked or missing chase cover or a failed cap seal at the top of the tall sided exterior chase, rather than the firebox itself. Meltwater gets in during freeze-thaw cycles and runs down behind the prefab liner until it shows up on a ceiling. A Level 2 inspection of the liner and smoke chamber tells you whether the seal alone fixes it or the liner took damage too. Call (844) 761-5636 for an exact quote; estimates are free.
No. Third-degree creosote is baked into the liner surface, and a brush won’t lift it, which puts it in the category of hazardous glaze rather than routine soot. In a prefab liner the practical options are professional removal or liner replacement, and some restorable liners can be resurfaced with HeatShield instead of replaced. Call (844) 761-5636 to find out which applies to your flue.
Leaves, seed debris, and twigs from the surrounding trees pack into caps and spark arrestors, and the wooded lots here send plenty of them down. A clogged cap restricts draft and can hide liner damage until smoke backs into the room. Inspecting and clearing the cap during a sweep catches it before it becomes a problem. Call (844) 761-5636 for an exact quote; estimates are free.
If your chimney needs a look, call (844) 761-5636 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. One contractor from sweep through repair, professional-grade materials, and a recommendation you can see for yourself.
Written by the team at Pittsburgh Chimney Cleaning.